engineering recuitment BHEL Engineer Trainee Mock Test 2025 Production Engineering (Manufacturing) Metrology and Inspection Limits, Fits and Tolerances
The following limits are specified to give a clearance fit between a shaft and a hole in a limit system
\(\begin{array}{l} Shaft = \;30_{ - 0.08}^{ - 0.021}mm\;\phi \\ Hole = \;30_{ - 0.000}^{ + 0.023}mm\;\phi \end{array}\)
Find the allowances on this system
1
0.021 mm
2
0.10 mm
3
0.08 mm
4
0.15 mm